The fully controllable color change TIX404 underwater light delivers the greatest range of colors and offers a powerful 7,500 verified fixture lumens and an ultra-wide 110° beam angle for the ultimate halo-effect.
Control colors, modes & special effects directly from your MFD and/or the optional Lumishore Display.
All Lumishore Thru-Hulls are ‘flush-fit’ with extremely low profiles. TIX models have the added benefit of an internal LED array and integrated driver, for the ability to service from inside the hull and to simplify installation.
Features
- Full Color – Full Color
- 7,500 Fixture Lumens
- 110° Beam Angle
- Warranty
Specifications
| Specification | Value |
|---|---|
| Available LED Colors | EOS Full Color Change |
| Lumens | 16,875 |
| Verified Fixture Lumens (White) | 7,500 |
| Number and Type of LED | White–12×10W / Green–12×3W / Blue–12×3W / Red–16×3W |
| LED Power – Hicob Array | Yes |
| Typical LED Life | 50,000+ Hours |
| Beam Angle (Degrees) | 110° |
| Driver | Multi-Channel Internal Driver |
| Supply Voltage | 12/24 V DC |
| Max Current Draw (12/24) | 5.8/2.9A |
| Housing Type | Marine Grade Aluminum Bronze |
| User Control Options | From your MFD and/or optional Lumishore Display |
| Lights Synchronized | Yes |
| Color Cycle | Yes |
| Color Cycle w/SPEED Adjust | Yes |
| Color Sweep w/SPEED Adjust | Yes |
| Customizable Favorites | Yes |
| Fixed Strobe (2-Speed) | Yes |
| WI-FI Control (APP) | Yes |
| SOUND-TO-LIGHT | Yes |
| Brightness Adjust | Yes |
| Auto Light Discovery & Setup | Yes |
Downloads
FAQs
The installation guide instructs mounting the unit in a dry, well-ventilated location.
No. The mechanical installation section warns not to remove the cartridge; doing so can damage the LED module and invalidate the warranty.
The guide says wood, metal, or carbon fibre hull installations require an isolation sleeve kit, and in that case you should NOT bond the lights.
The tool list specifies: “Marine Sealant (Use only 3M 4200)”.
No. The guide states the light’s cable should not be cut or extended; use the available extension cables instead.
The guide recommends installing the light 6”–10” (150–250mm) below the minimum load waterline.
The datasheet lists the profile (height) of the housing as 8mm (0.32”).
For best results, the guide recommends spacing lights between 2.5ft (0.8m) and 6.5ft (2m) apart.
No. The guide says never try to install or remove the light with the vessel in the water.
Yes. The guide says all power connections must be made waterproof, using a suitable junction box or waterproof connectors.
Do not over-tighten. The guide states a force of 3Nm on each bolt should not be exceeded.
Yes. The guide says to use a suitable fuse/circuit breaker and that “Each light” should be “individually fused.”
The datasheet specifies a light face diameter of 88mm (3.47”).
Contact the SailRACE team — as certified marine experts we’re happy to help with product selection, installation and after-sales servicing, before and after your purchase.
