The SMX154 offers boat owners unprecedented full color control of their underwater lighting system, delivering 7,000 verified fixture lumens and a wide 90° beam angle.
Control your SMX154 underwater lights directly from your compatible MFD and/or Lumishore Display.
Lumishore’s unique light discovery and light auto-install function simplifies the system setup and reduces installation time.
Suitable for stepped hulls, transoms, and side mounting.
Features
- Full Color – Full Color
- 7,000 Fixture Lumens
- 90° Beam Angle
- Warranty
Specifications
| Specification | Value |
|---|---|
| Available LED Colors | Full EOS Color Change (Rgbw) |
| Lumens | 15,750 |
| Verified Fixture Lumens (White) | 7,000 |
| Number and Type of Leds | White–12×10W / Green–12×3W / Blue–12×3W / Red–16×3W |
| LED Power – Hicob Array | Yes |
| Typical LED Life | 50,000+ Hours |
| Beam Angle (Degrees) | 90° |
| Driver | Multi-Channel Internal Driver |
| Supply Voltage | 12/24 V DC |
| Max Current Draw | 4.0A/2.0A |
| Housing Type | Marine Grade Bronze / Glass Lens |
| User Control Options | From your MFD and/or optional Lumishore Display |
| Lights Synchronized | Yes |
| Color Cycle | Yes |
| Color Cycle w/SPEED Adjust | Yes |
| Color Sweep w/SPEED Adjust | Yes |
| Customizable Favorites | Yes |
| Fixed Strobe (2-Speed) | Yes |
| WI-FI Control (APP) | Yes |
| SOUND-TO-LIGHT | Yes |
| Brightness Adjust | Yes |
| Auto Light Discovery & Setup | Yes |
Downloads
FAQs
Apply a continuous thick bead of sealant to the back of the light, slightly overfilling the outer recess, and also apply a bead around the cable gland.
Yes. Always ensure the vessel’s power source and battery are disconnected or isolated prior to installation.
For best underwater illumination, Lumishore recommends mounting the light 4″ to 12″ (100–300 mm) below the minimum load water line.
Yes. Cored hulls must be sealed before fitting the lights; follow the hull manufacturer’s instructions.
When installing three or more lights, equal spacing of 2.5’–3’ is recommended for a consistent light pool.
Yes. The light is temperature sensitive and must not be installed close to the exhaust outlet or other heat source.
Drill pilot holes for the screws at 9/64 in (3.5 mm).
One EOS i-Connect Hub can power up to 4 lights.
Wait until the sealant has fully cured before launching, following the sealant manufacturer’s directions.
Attach the light using the 3 supplied screws by hand tightening with a screwdriver.
Contact the SailRACE team — as certified marine experts we’re happy to help with product selection, installation and after-sales servicing, before and after your purchase.
