Home » Shop » Security System Sensors » Garmin OnDeck security

Garmin OnDeck security

Original price was: $21.60.Current price is: $11.22.

Sale!
SKU: 010-13009-03 Category:

Use this Garmin OnDeck security sensor to help monitor a protected hatch, door, or compartment within a compatible onboard remote-monitoring installation.

Reference: Sensor de seguridad

  • Designed for integration with the matching Garmin OnDeck system referenced in the title.
  • Useful when extending vessel security and remote awareness across connected compartments or entry points.

FAQs

How should wires be managed during installation?

Ensure that all cables reach each required component before mounting, and use cable extensions where necessary. Do not cut any integrated cables and use only approved extensions where specified.

What should I consider before installing this system?

You should familiarize yourself with all of the component mounting and connection considerations before beginning installation. Laying out all components on the boat to ensure cable reach is advised, and extension cables are available if needed.

What safety precautions are important during installation?

Always wear safety glasses and be aware of moving or hot parts. Failure to install and maintain the equipment as instructed could result in damage or injury.

What tools and supplies are needed for installation?

You will need safety glasses, drill, drill bits, wrenches, screwdrivers, cutters, solder and water-tight connectors, dielectric grease, marine sealant, and other marine tools.

Can the ECU power cable be extended during installation?

Yes, you can extend the ECU power cable if needed. Use the correct wire gauge as referenced in the manual.

Where should the alarm be installed for best performance?

The alarm should be installed near the primary helm station or under the dashboard.

What are the considerations for mounting hardware?

Use only the provided mounting screws or quality stainless or brass hardware to prevent magnetic interference. Test the hardware with a handheld compass for magnetic fields.

What power source voltage is required for the ECU connection?

The ECU must be connected to a 12 to 24 Vdc power source for proper operation.

What are the NMEA 2000 power requirements?

The NMEA 2000 power cable must be connected to a 9 to 16 Vdc power source.

Is the pump’s cable length extendable?

No, the cables connecting the ECU to the pump cannot be extended; mount within 0.5 m (19 in.) of the ECU.

What type of thread sealant is recommended for hydraulic connections?

An appropriate thread sealant should be used on all pipe threads in the hydraulic system.

Who do I contact for help with installation, servicing or advice?

Contact the SailRACE team — as certified marine experts we’re happy to help with product selection, installation and after-sales servicing, before and after your purchase.